• Categories

  • Archives

ice cube tray candles, and BRAAAAAAINS!!!

Braaaains!!! On fire! Whether it’s Halloween or the Zombie Apocalypse, this craft has got you covered. And you can use the exact same steps in this tutorial with any silicone ice cube tray or mold to produce candles appropriate for all other times and events, too.

Candle-making is actually a very simple craft in its basic form, and fairly inexpensive. I learned how to make candles with aluminum pop cans back in junior high youth group, and have been making them with various molds and containers ever since.

The idea with this tutorial is to give you some of the basics of simple candle-making, plus a way to make candles in silicone ice cube trays that you might want to use later for other things. Like making ice. Or cool shaped chocolates. Or soaps. Or jello snacks. Or crayons. Meaning that you don’t want to poke holes in the bottoms of your trays for the wick to go through, so you’ll need a different method for putting the wicks in your candles. I have for you that other method. And it’s easy and it involves power tools, so there is nothing here not to love. Nothing!

The silicone brain mold I’ve used in this tutorial came from thinkgeek.com. They have a bunch of wonderful geeky ice cube trays, some others of which would also work well for candles. You’ll also find a vast wealth of possibilities just by googling “silicone ice cube trays,” and there are bound to be some options available at your local kitchen goods, household goods and/or dollar stores as well. Silicone baking trays for muffins or cake pops or other small individual objects can also work for this.

 ——————————————

What you’ll need

Materials:

  • wax – you can find wax at most grocery stores, in with the canning supplies.  Or, just melt some old candles down.
  • candle wick – you can buy this at a craft store, or make your own with thick string or twine, table salt, Borax and water
  • [optional] old crayons – for adding colour to your candles
Tools:
  • silicon ice cube tray
  • cleaned & emptied tin can
  • wooden stir stick – this could be a popsicle stick, an old wooden spoon that you don’t plan to use for anything else, a clean stick from outside (strip the bark off first), a paint stick, or anything really. It can be something metal too. Just avoid plastic, and make sure it’s something cheap and replaceable that you don’t ever need to use for anything else.
  • tongs
  • oven mitt
  • small metal pot
  • stove
  • scissors
  • drill and 3/32 inch drill bit (or something close to that size)
  • old phone book or piece of scrap wood

 ——————————————

Putting it all together

1) Gather your materials; get your silicone ice cube tray out and set it on the counter near the stove. You may want to put a sheet of paper underneath to catch any stray wax drips or spills. Make sure your tongs, oven mitt and stir stick are out and at the ready nearby.

 

2) Break the wax up into smaller pieces and place the pieces inside your cleaned-out tin can. A lot of the store bought wax comes in chunks that are easy to break into smaller pieces, but you can also just use a knife to chop the wax up. The pieces don’t need to be super small, just small enough to fit into the can. Obviously the smaller they are the quicker they’ll melt, though.

Note: instead of using a tin can, you can also use an empty, cleaned out pop or beer can that you’ve cut the top off of. You’ll need to be careful of the sharp edges, but this way you can fold a little spout in one side of the can that might make pouring the melted wax into the molds easier.

 

3) Put about 1-3 inches of water in your metal pot. Put the pot on the stove and turn the stove on high, to start the water heating up.

 

4) Place the tin can full of wax inside the pot of water. If the tin can bobs and floats, remove some of the water from the pot until the can rests on the bottom of the pot. As the water heats the can up, the wax inside the can will melt. If you want, add a couple more chunks of wax as the first pieces melt and make more space in the can.

 

5) If you want to add colour to your candle, get some old crayons of the colour(s) you want your candle to be, and either break them into small pieces or use a pencil sharpener or knife to make crayon shavings. Dump the crayon bits into the tin can with the wax. Go easy on the crayon though – you don’t need a lot to add plenty of colour, and if you use too much it will change the consistency of the candle wax to be less nice. I usually use between half to a whole crayon per batch of melted wax, and my batches of melted wax are as many wax chunks as I can fit loosely into the tin can I’m using.

 

6) Keep an eye on the wax as it melts. If the water is evaporating faster than the wax is melting, just add more water to the pot. It may slow down the melting time a bit as the new water heats up, but just be patient. When the wax looks entirely melted, give it a stir to mix the colour in and make sure there are no unmelted chunks hiding at the bottom of the can.

 

7) Once the wax (and crayon) is fully melted, pour it carefully into the ice cube tray, filling each space right to the top. 

 

8) Turn the stove off, clean up any stray wax and let the stuff in the tray cool and set. It will take an hour or two, maybe a few. Depends on the size of the individual shapes and such. DO NOT put the tray in the fridge to try and make it set faster. It won’t, say, ruin things, but it has a tendency to make the wax cave in more in the middle as it sets, and sometimes I’ve found it seems to mess a bit with the consistency of the wax and the crayon in particular. Just leave it out on a counter where it won’t be bumped, and be patient. Go do something else. Tell you what: this blog alone has two and a half years’ worth of weekly craft projects on it – go find another one to do while you wait for your wax shapes to be ready.

 

9) Once the wax is fully cooled and set, gently pop each piece out of the tray. This is where the silicone is really great, because you can basically just peel it away, and it doesn’t stick to the wax.

 

10) Grab your wax shapes, your drill and drill bit, your phone book or bit of scrap wood, your wick and a pair of scissors. Go somewhere with an outlet you can plug the drill into (unless it’s a cordless drill, obviously).

 

11) Before plugging the drill in/turning the drill on, insert the bit into the drill. The bit size suggested in this tutorial is 3/32 inch, but you don’t need to necessarily stick to that. Just make sure the bit size you’re using is a little wider around than your candle wick.

Place one of your wax shapes right side up on top of the phone book or piece of scrap wood. Plug in/turn on your drill. 

 

12) Slowly and carefully, holding onto the wax piece with on hand, drill a hole right down through it’s center, all the way through until the drill hits the phone book or wood beneath. Then pull the drill out of the wax (hint: it’s sometimes easier to pull a drill out of any hole it’s just made if you keep it on and spinning slowly as you pull it back. Just be careful of your fingers in this case!)

 

13) Cut a length of wick a couple inches longer than your candle is tall, and tie a knot or two at one end.

 

14) Now poke the wick through the hole you’ve created. It shouldn’t be too tricky to get it to poke through, and if you’re really having trouble you can either try using a needle or other long skinny object to help it along, or dip your wick in some melted wax to stiffen it. (By the way, ever notice how dirty candle-making sounds? Sheesh.) Once the wick is all the way through, pull on it firmly until the knot is pulled tight up against the base of the hole through the candle, then trim the wick at the top of the candle so about 1/4 inch of it is showing above the wax.

 

15) Repeat for each wax shape.

When you light the candles, the wax at the top will melt and plug the extra space in the hole around the wick. Or, if you want to plug the hole before lighting the candles (say if you’re giving them as a gift or something), you can drip a bit of melted wax over the top of each hole around the wick, or hold the head of a just-blown-out match up against the hole’s opening, so it melts the wax right around it without lighting the wick.

 

16) Light and enjoy!

 

Share
Previous Post
Leave a comment

24 Comments

  1. Christine

     /  October 11, 2012

    does the wax ruin the silicone shapes in any way? Can I for example use silicone cupcake shapes and bake cupcakes in them afterwards? (after some cleaning)

    Reply
    • Tally

       /  October 11, 2012

      Nope, it doesn’t ruin them at all! They may require a bit of cleaning, but generally the wax comes away with very little to no residue or bits left behind. And since wax (and crayons) are non toxic, if there /is/ a bit of residue that you miss during cleaning, it won’t hurt anyone. The trays can absolutely be cleaned and used for food stuff again afterwards.

      Reply
  2. I need to get one of the ice cube trays! I’ve seen so many awesome tutorials with these

    Reply
  3. Very Cool.

    Reply
  4. Got to make some of these this weekend!

    Reply
  5. Working on crafts and homemade projects in your house is often fun, plus its also something that you could turn into a small home-based business once you get used to what you’re making. Candles will always be a preferred gift, since they are for almost any season of the year, they create excellent gifts, and you may put just as much creativity as you have in to the candle making designs that you come up with. This site is wonderful for reinforcing these points and ideas.

    Reply
  6. handsofglue

     /  January 19, 2013

    Candle making never seemed so accessible! If you added some essential oils would that work as a way of adding a scent to the candle?

    Reply
    • Tally

       /  January 20, 2013

      Yup, should work just fine! I tried it myself back in my teen years when I got a bit obsessed with making everything around me smell like vanilla.

      Reply
  7. I actually intend to bookmark this article, “ice cube tray
    candles, and BRAAAAAAINS!!! | Tally’s Treasury” medvedic.com on my web-site. Do you really care in the event I personallydo it? Many thanks ,Gerardo

    Reply
  8. You ought to be a part of a contest for one of the finest sites on the web.
    I most certainly will highly recommend this website!

    Reply
  9. That is really interesting, You are an excessively professional blogger.
    I’ve joined your feed and sit up for in the hunt for extra of
    your great post. Additionally, I have shared your web site in my social
    networks

    Reply
  10. An intriguing discussion is worth comment. I do believe that you need to
    publish more on ths subject matter, it may not be
    a taboo matter but typically people doo not speak about such topics.

    To the next! Alll the best!!

    Reply
  11. Hello colleagues, its fantastic post concerning cultureand
    entirely explained, keep it up all the time.

    Reply
  12. You’re so interesting! I do not suppose I’ve truly read something like that before.
    So good to discover someone with some unique thoughts on this topic.

    Seriously.. thank you for starting this up. This website is one thing that is needed on the internet, someone with a little
    originality!

    Reply
  13. Hi Dear, are you truly visiting this website regularly, if so afterward you will without doubt obtain fastidious knowledge.

    Reply
  14. As your wardrobe changes with the seasons, so will the items
    of jewelry that you choose. When you are ready to adorn your body with
    something beautiful, take advantage of the rich Ettika
    jewellery designs to satisfy your every desire. These nine factors, as outlined
    in Table 3, may be arranged to minimize stress.

    Reply
  15. Hey There. I found your blog the usage of msn.
    That is a really well written article. I’ll be sure to bookmark it and come back to read
    extra of your helpful information. Thanks for the post.
    I will definitely comeback.

    Reply
  16. I think the admin of this site is in fact working hard in support of his webb site, as
    here every stuff is quality based data.

    Reply
  17. Natürlich. Sie. Die. Wir werden gleich zur Anleitung
    kommen.

    Reply
  18. Cool! I made those too. I also used to make and sell crayons called Crayniums and soap called Brain Washed.

    PS: I designed that ice cube tray :)
    It was originally called Brain Freeze but 7-11 forced them to change the name. (Super lame. That’s a true story; my name is on the box)

    Reply
  1. Ice Cube Tray Brain Candles · Candle Making | CraftGossip.com
  2. Świeczka na Halloween | Mieszkaniowe inspiracje
  3. 17 Cool DIY Halloween Candles And Candleholders

Leave a Reply to nail art Flower Cancel reply

Your email address will not be published. Required fields are marked *